Longitudinal study of paralytic shellfish toxins along Canada's coast.

Paralytic shellfish toxins (PST) in shellfish products have led to severe risks to human health. To monitor the risk, the Canadian Shellfish Sanitation Program has been collecting longitudinal PST measurements in blue mussel (Mytilus edulis) and soft-shell clam (Mya arenaria) samples in six coastal provinces of Canada. The spatial distributions of major temporal variation patterns were studied via Functional Principal Component Analysis. Seasonal increases in PST contamination were found to vary the most in terms of magnitude along the coastlines, which provides support for location-specific management of the time-sensitive PST contamination. In British Columbia, the first functional principal component (FPC1) indicated the variance among the magnitudes, while FPC2 indicated the seasonality of the PST levels. The temporal variations tended to be positively correlated with the abundance of dianoflagellates Alexandrium spp., and negatively with precipitation and inorganic nutrients. These findings indicate the underlying mechanism of PST variation in various geographical settings. In New Brunswick, Prince Edward, and Nova Scotia, the top FPCs indicated that the PST contamination differed mostly in the seasonal increase of the PST level during summer.

Single Crystal Seed Induced Epitaxial Growth Stabilizes α-FAPbI3 in Perovskite Solar Cells.

FAPbI3 stands out as an ideal candidate for the photoabsorbing layer of perovskite solar cells (PSCs), showcasing outstanding photovoltaic properties. Nonetheless, stabilizing photoactive α-FAPbI3 remains a challenge due to the lower formation energy of the competitive photoinactive δ-phase. In this study, we employ tetraethylphosphonium lead tribromide (TEPPbBr3) single crystals as templates for the epitaxial growth of PbI2. The strategic use of TEPPbBr3 optimizes the evolution of intermediates and the crystallization kinetics of perovskites, leading to high-quality and phase-stable α-FAPbI3 films. The TEPPbBr3-modified perovskite exhibits optimized carrier dynamics, yielding a champion efficiency of 25.13% with a small voltage loss of 0.34 V. Furthermore, the target device maintains 90% of its initial PCE under maximum power point (MPP) tracking over 1000 h. This work establishes a promising pathway through single crystal seed based epitaxial growth for achieving satisfactory crystallization regulation and phase stabilization of α-FAPbI3 perovskites toward high-efficiency and stable PSCs.

Temporal and spatial variation of domoic acid along Canada's coast.

Shellfish poisonings have posed severe risks to human health globally. The Canadian Shellfish Sanitation Program was established in 1948 to monitor the toxin levels at shellfish harvesting sites along the coast of six provinces in Canada. Domoic acid has been a causal toxin for amnesic shellfish poisoning, and a macro-scale analysis of the temporal and spatial variation of domoic acid along Canada's coast were conducted in this study. We aggregated the toxin levels by week in blue mussel (Mytilus edulis) and soft-shell clam (Mya arenaria) samples, respectively, over a one-year scale. The subsequent application of Functional Principal Component Analysis unveiled that magnitudes of seasonal variation and peaked DA levels around early summer, spring, or mid-fall formed the largest variation in the toxin levels in blue mussels along coastlines of British Columbia and Prince Edward Island and in soft-shell calms along those of New Brunswick and Nova Scotia. In Quebec, the DA levels were low and varied mostly in terms of the overall magnitude across spring to fall. Downstream correlation analyses in British Columbia further discovered that, at most sites, the strongest correlations were negative between precipitation as well as inorganic nutrients (including nitrate, nitrite, phosphate, and silicate) on one side and DA a few weeks afterward on the other. These findings indicated associations between amnesic shellfish poisoning and environmental stresses.

Coupling of gene regulation and carrier modification manipulates bacterial biofilms as robust living catalysts.

The biofilm of an engineered strain is limited by slow growth and low yield, resulting in an unsatisfactory ability to resist external stress and promote catalytic efficiency. Here, biofilms used as robust living catalysts were manipulated through dual functionalized gene regulation and carrier modification strategies. The results showed that gene overexpression regulates the autoinducer-2 activity, extracellular polymeric substance content and colony behavior of Escherichia coli, and the biofilm yield of csgD overexpressed strains increased by 79.35 % compared to that of the wild type strains (p < 0.05). In addition, the hydrophilicity of polyurethane fibres modified with potassium dichromate increased significantly, and biofilm adhesion increased by 105.80 %. Finally, the isoquercitrin yield in the catalytic reaction of the biofilm reinforced by the csgD overexpression strain and the modified carrier was 247.85 % higher than that of the untreated group. Overall, this study has developed engineered strains biofilm with special functions, providing possibilities for catalytic applications.

Silkworm pupae protein co-degradation by magnetic nanoparticles immobilized proteinase K and Mucor circinelloides aspartic protease for further utilization of sericulture by-products.

Silkworm pupae, by-product of sericulture industry, is massively discarded. The degradation rate of silkworm pupae protein is critical to further employment, which reduces the impact of waste on the environment. Herein, magnetic Janus mesoporous silica nanoparticles immobilized proteinase K mutant T206M and Mucor circinelloides aspartic protease were employed in the co-degradation. The thermostability of T206M improved by enhancing structural rigidity (t1/2 by 30 min and T50 by 5 °C), prompting the degradation efficiency. At 65 °C and pH 7, degradation rate reached the highest of 61.7%, which improved by 26% compared with single free protease degradation. Besides, the immobilized protease is easy to separate and reuse, which maintains 50% activity after 10 recycles. Therefore, immobilized protease co-degradation was first applied to the development and utilization of silkworm pupae resulting in the release of promising antioxidant properties and reduces the environmental impact by utilizing a natural and renewable resource.

Molecular modification and biotechnological applications of microbial aspartic proteases.

The growing preference for incorporating microbial aspartic proteases in industries is due to their high catalytic function and high degree of substrate selectivity. These properties, however, are attributable to molecular alterations in their structure and a variety of other characteristics. Molecular tools, functional genomics, and genome editing technologies coupled with other biotechnological approaches have aided in improving the potential of industrially important microbial proteases by addressing some of their major limitations, such as: low catalytic efficiency, low conversion rates, low thermostability, and less enzyme yield. However, the native folding within their full domain is dependent on a surrounding structure which challenges their functionality in substrate conversion, mainly due to their mutual interactions in the context of complex systems. Hence, manipulating their structure and controlling their expression systems could potentially produce enzymes with high selectivity and catalytic functions. The proteins produced by microbial aspartic proteases are industrially capable and far-reaching in regulating certain harmful distinctive industrial processes and the benefits of being eco-friendly. This review provides: an update on current trends and gaps in microbial protease biotechnology, exploring the relevant recombinant strategies and molecular technologies widely used in expression platforms for engineering microbial aspartic proteases, as well as their potential industrial and biotechnological applications.

Biochemical and protein nutritional potential of mulberry (Morus alba L.) leaf: partial substitution improves the nutrition of conventional protein.

BACKGROUND: With the requirements of environmental, cost and economic sustainability, new sources of alternative proteins in the livestock industry are receiving increasing attention. Mulberry (Morus alba L.) leaves are a unique feed resource because of their high protein content and large availability. Therefore, mining sustainable protein suitable for the animal husbandry industry in sericulture resources could achieve a win-win situation. RESULTS: The protein content in mulberry leaves is 232.10-386.16 g kg-1 , and the mean value of crude fat content is 43.76 ± 8.48 g kg-1 , which has the advantages of protein content and energy. In addition, the average content of phytic acid in mulberry leaves is only 1.88 ± 0.56 g kg-1 , which means that it is not inhibited in terms of nutrient absorption. Meanwhile, the digestibility of protein was Bean pulp > Sample 8 ≈ Alfalfa ≈ Sample 13 ≈ Cottonseed meal > Fish meal, and the ß-turn and particle size of mulberry leaf protein are more conducive to digestion in vitro. Furthermore, the protein of Sample 13 had the richest essential amino acids (252.00 g kg-1 ) and the highest essential amino acid index (EAAI), which was superior to conventional feed protein. In addition, the partial substitution of mulberry leaf protein (15%) significantly increased the EAAI value of conventional feed protein. However, to balance nutrition, it is necessary to combine mulberry leaf protein with other proteins to further broaden its application field. CONCLUSION: Mulberry leaves are a new source of feed protein, which helps to alleviate the two major problems of mulberry resource surplus and feed protein resource shortage. © 2023 Society of Chemical Industry.

Effect of noise isolation using noise-cancelling headphones during laparoscopic surgery for postoperative pain reduction: A randomized clinical trial.

STUDY OBJECTIVE: Most laparoscopic surgeries under general anesthesia are performed in noisy environments, although the effect of intraoperative noise reduction on postoperative pain remains uncertain. This study aimed to explore whether postoperative pain could be reduced through the intraoperative use of noise-cancelling headphones. DESIGN: This study was conducted as a prospective parallel-group randomized clinical trial. SETTING: Operating room and surgery room. PATIENTS: Ninety patients who underwent laparoscopic surgery under general anesthesia. INTERVENTIONS: In the intervention group, noise-cancelling headphones were used to reduce noise intensity during laparoscopic surgery under general anesthesia. MEASUREMENTS: The primary outcome was the maximum movement-evoked pain intensity within 24 h post-surgery, measured using a 10-point numeric rating scale. Secondary outcomes included the maximum resting pain score and total opioid consumption during the 24-h period post-surgery. Mean intraoperative noise and the proportion of intraoperative time with noise intensity ≥70 dB were recorded. MAIN RESULTS: The maximum movement-evoked pain score was significantly lower in the intervention group than in the control group (mean score [SD], 2.7 [1.0] and 4.0[1.0], respectively; P < 0.001). The intervention group required significantly fewer opioids than the control group (mean [SD], 44.2 [12.8] and 51.3[17.5] mg, respectively; P = 0.032). In the control group, but not the intervention group, all postoperative pain scores were significantly associated with the proportion of intraoperative time with noise intensity ≥70 dB, which was an independent risk factor for postoperative pain. CONCLUSION: During laparoscopic surgery under general anesthesia, intraoperative noise isolation using noise-cancelling headphones is a safe and effective strategy for relieving postoperative pain and decreasing total opioid analgesic consumption.

Effect of intraoperative noise on postoperative pain in surgery patients under general anesthesia: evidence from a prospective study and mouse model.

BACKGROUND: Most patients are in a noisy environment during abdominal surgery under general anesthesia. This study included patients who underwent abdominal surgery under general anesthesia and established an animal model to determine whether intraoperative noise affects postoperative pain. MATERIALS AND METHODS: This prospective study included 200 patients who underwent abdominal surgery under general anesthesia. Intraoperative noise and electroencephalograms were continuously recorded, and the mean level and time proportion of noise intensity of greater than 70 dB were calculated. Maximum postoperative pain was assessed using a numerical rating scale at 0-12 h and 12-24 h after surgery, and postoperative analgesia consumption in patients receiving patient-controlled intravenous analgesia was recorded. Postoperative pain intensity and electroencephalogram amplitude were compared between patients with high-noise exposure (time proportion of noise intensity greater than 70 dB ≥40%) and low-noise exposure (<40%). Mechanical pain sensitivity was tested in two groups of mice with plantar incisions exposed to 40 dB or 70-100 dB. RESULTS: The time proportion of noise intensity greater than 70 dB was identified as an independent risk factor for postoperative pain intensity ( P <0.001). P ain numerical rating scale 0-12 h (4.5±1.5 vs. 3.7±1.3, P =0.001) and 12-24 h (3.9±1.5 vs. 3.2±1.1, P =0.004) after surgery in patients with high-noise exposure was significantly higher than in patients with low-noise exposure. The electroencephalogram amplitude of patients with high-noise exposure was significantly lower than that of patients with low-noise exposure ( P <0.05). In the mouse model, mechanical hyperalgesia in the 70-100 dB group was significantly greater than that in the 40 dB group ( P <0.001). CONCLUSION: High-level intraoperative noise exposure aggravates the degree of postoperative pain and analgesic needs of patients undergoing abdominal surgery, which may be related to the impact of noise on the neurophysiological activity of the brain and postoperative hyperalgesia.

Odorant-Binding Protein 6 Contributes High Binding Affinity to Insecticides in a Parasitic Wasp Meteorus pulchricornis (Hymenoptera: Braconidae).

Meteorus pulchricornis is a preponderant parasitic wasp of various lepidopteran pests. The extensive application of broad-spectrum insecticides usually causes serious threats to the olfactory recognition of nontarget insects such as parasitoid wasps. However, the binding mechanism of odorant-binding proteins (OBPs) to insecticides in parasitoid wasps remains unknown. Herein, we find that the MpulOBP6 protein had a strong binding affinity to three insecticides (phoxim, chlorpyrifos, and chlorfenapyr). Results of computational simulations revealed that the hydrophobic interaction contributed by a mass of nonpolar amino acid residues was the primary driving force in the formation and stabilization of MpulOBP6-insecticide complexes. Among them, four residues (Met75, Val84, Phe121, and Pro122) and two residues (Val84 and Phe111) play an essential role in the binding of MpulOBP6 to phoxim and chlorfenapyr, respectively. Our findings could be instrumental to elucidate the effects of insecticide application toward the olfactory recognition of nontarget insects in the processes of agricultural production.

Advances in the One-Step Approach of Polymeric Materials Using Enzymatic Techniques.

The formulation in which biochemical enzymes are administered in polymer science plays a key role in retaining their catalytic activity. The one-step synthesis of polymers with highly sequence-controlled enzymes is a strategy employed to provide enzymes with higher catalytic activity and thermostability in material sustainability. Enzyme-catalyzed chain growth polymerization reactions using activated monomers, protein-polymer complexation techniques, covalent and non-covalent interaction, and electrostatic interactions can provide means to develop formulations that maintain the stability of the enzyme during complex material processes. Multifarious applications of catalytic enzymes are usually attributed to their efficiency, pH, and temperature, thus, progressing with a critical structure-controlled synthesis of polymer materials. Due to the obvious economics of manufacturing and environmental sustainability, the green synthesis of enzyme-catalyzed materials has attracted significant interest. Several enzymes from microorganisms and plants via enzyme-mediated material synthesis have provided a viable alternative for the appropriate synthesis of polymers, effectively utilizing the one-step approach. This review analyzes more and deeper strategies and material technologies widely used in multi-enzyme cascade platforms for engineering polymer materials, as well as their potential industrial applications, to provide an update on current trends and gaps in the one-step synthesis of materials using catalytic enzymes.

Dynamics of fecal coliform bacteria along Canada's coast.

The vast coastline provides Canada with a flourishing seafood industry including bivalve shellfish production. To sustain a healthy bivalve molluscan shellfish production, the Canadian Shellfish Sanitation Program was established to monitor the health of shellfish harvesting habitats, and fecal coliform bacteria data have been collected at nearly 15,000 marine sample sites across six coastal provinces in Canada since 1979. We applied Functional Principal Component Analysis and subsequent correlation analyses to find annual variation patterns of bacteria levels at sites in each province. The overall magnitude and the seasonality of fecal contamination were modelled by functional principal component one and two, respectively. The amplitude was related to human and warm-blooded animal activities; the seasonality was strongly correlated with river discharge driven by precipitation and snow melt in British Columbia, but such correlation in provinces along the Atlantic coast could not be properly evaluated due to lack of data during winter.

Radical polymeric p-doping and grain modulation for stable, efficient perovskite solar modules.

High-quality perovskite light harvesters and robust organic hole extraction layers are essential for achieving high-performing perovskite solar cells (PSCs). We introduce a phosphonic acid-functionalized fullerene derivative in mixed-cation perovskites as a grain boundary modulator to consolidate the crystal structure, which enhances the tolerance of the film against illumination, heat, and moisture. We also developed a redox-active radical polymer, poly(oxoammonium salt), that can effectively p-dope the hole-transporting material by hole injection and that also mitigates lithium ion diffusion. Power conversion efficiencies of 23.5% for 1-square-centimeter mixed-cation-anion PSCs and 21.4% for 17.1-square-centimeter minimodules were achieved. The PSCs retained 95.5% of their initial efficiencies after 3265 hours at maximum power point tracking under continuous 1-sun illumination at 70° ± 5°C.

More efficient barley malting under catalyst: Thermostability improvement of a ß-1,3-1,4-glucanase through surface charge engineering with higher activity.

ß-1,3-1,4-Glucanase is an indispensable biocatalyst in barley brewing industry for its crucial effect in reducing the viscosity of mash. However, the unsatisfactory thermostability greatly limited its application performance. In this study, structure-based surface charge engineering was conducted aiming at thermostability improvement of BisGlu16B, a highly active ß-1,3-1,4-glucanase from Bispora sp. MEY-1. By applying the enzyme thermal stability system (ETSS), residues D47, D213, and D253 were inferred to be critical sites for thermal properties. Single (D47A, D213A, and D253A) and combination (D47A/D213A/D253A) mutants were generated and compared with BisGlu16B. Among all improved mutants, D47A/D213A/D253A outstanded in thermostability. In comparison with BisGlu16B, its T50 and Tm were respectively increased by 7.0 °C and 4.3 °C, while the t1/2 at 70 °C was 8.1 times that of the wild type. Furthermore, the catalytic activity of D47A/D213A/D253A also increased by 42.5%, compared with BisGlu16B (42,900 ± 300 U/mg vs. 30,100 ± 800 U/mg). Comparing with BisGlu16B and commercial enzyme treatment groups, under simulated malting conditions, efficiency improvement was observed in decreasement of viscosity (35.5% and 90.7%) and filtration time (30.9% and 34.6%) for D47A/D213A/D253A treatment group. Molecular dynamics simulation showed that mutation sites A47, A213, and A253 increased the protein rigidity by lowering the overall root mean square deviation (RMSD). This study may bring optimization of technology and improvement of producing efficiency to the present brewing industry.

Asn57 N-glycosylation promotes the degradation of hemicellulose by ß-1,3-1,4-glucanase from Rhizopus homothallicus.

N-glycosylation alters the properties of different enzymes in different ways. Rhizopus homothallicus was first described as an environmental isolate from desert soil in Guatemala. A new gene encoding glucanase RhGlu16B was identified in R. homothallicus. It had high specific activity (9673 U/mg) when barley glucan was used as a substrate, and ß-glucan is hemicellulose that is abundant in nature. RhGlu16B has only one N-glycosylation site in its Ala55-Gly64 loop. It was found that N-glycosylation increased its Tm value and catalytic efficiency by 5.1 °C and 59%, respectively. Adding N-glycosylation to the same region of GH16 family glucanases TlGlu16A (from Talaromyces leycettanus) increased its thermostability and catalytic efficiency by 6.4 °C and 38%, respectively. In a verification experiment using GH16 family glucanases BisGlu16B (from Bisporus) in which N-glycosylation was removed, N-glycosylation also appeared to promote thermostability and catalytic efficiency. N-glycosylation reduced the overall root mean square deviation of the enzyme structure, creating rigidity and increasing overall thermostability. This study provided a reference for the molecular modification of GH16 family glucanases and guided the utilization of ß-glucan in hemicellulose.

A Thermal Infrared Pedestrian-Detection Method for Edge Computing Devices.

The thermal imaging pedestrian-detection system has excellent performance in different lighting scenarios, but there are problems regarding weak texture, object occlusion, and small objects. Meanwhile, large high-performance models have higher latency on edge devices with limited computing power. To solve the above problems, in this paper, we propose a real-time thermal imaging pedestrian-detection method for edge computing devices. Firstly, we utilize multi-scale mosaic data augmentation to enhance the diversity and texture of objects, which alleviates the impact of complex environments. Then, the parameter-free attention mechanism is introduced into the network to enhance features, which barely increases the computing cost of the network. Finally, we accelerate multi-channel video detection through quantization and multi-threading techniques on edge computing devices. Additionally, we create a high-quality thermal infrared dataset to facilitate the research. The comparative experiments on the self-built dataset, YDTIP, and three public datasets, with other methods show that our method also has certain advantages.

Sweet-flavored peptides with biological activities from mulberry seed protein treated by multifrequency countercurrent ultrasonic technology.

To increase the reuse of food residues, multifrequency countercurrent ultrasonic treatment was used to enhance the extraction yield of defatted mulberry seed protein (DMSP), and sweet-flavored peptides from DMSP hydrolysates (DMSPHs) were obtained for the first time. Here, the DMSP yield was increased by 16.2% (p < 0.05) while the power density was halved compared with single-frequency ultrasonic treatment. According to Fick's second law, a molecular diffusion dynamics model was developed to be suitable for predicting the pretreatment conditions (R2 = 0.9785). After that, the sweet-flavored peptides were purified and the main amino acid sequences were identified, i.e., FEGGSIE, KDFPEAHSQAT, and GSQPAEGAK. Moreover, the antioxidant activities of DMSPHs prepared with tri-frequency treatment was higher than 60%. The DMSPHs retarded the growth of HepG2 cells in vitro, increased the necrotic quadrant (Q1-UL), and extended the S phase. Therefore, the sweet-flavored peptides prepared from DMSPHs using the multifrequency-ultrasonic treatment have significant biological activities.

Lowering energy consumption for fermentable sugar production from Ramulus mori: Engineered xylanase synergy and improved pretreatment strategy.

Biorefinery of Ramulus mori with lower energy consumption through improved enzyme and pretreatment strategies was reported. Directed evolution and saturation mutagenesis were used for the modification of xylanase, the yield of fermentable sugars and the degree of synergy (DS) were determined for different pretreatment (seawater/non-seawater) and enzyme treatment groups (xylanase/cellulase/co-treatment). The dominant mutant I133A/Q143Y of Bispora sp. xylanase XYL10C_ΔN was obtained with improved specific activity (1860 U/mg), catalytic efficiency (1150 mL/s∙mg) at 40 °C, and thermostability (T50 increased by 7 °C). With the pretreatment of seawater immersion, the highest yield of fermentable sugars for Ramulus mori at 40 °C reached 199 µmol/g when hydrolyzed with cellulase and I133A/Q143Y, with the highest DS of 2.6; this was 4.5-fold that of the group hydrolyzed by cellulase alone with non-seawater pretreatment. Thus, bioconversion of reducing sugar from Ramulus mori was improved significantly at lower temperatures, which provides an efficient and energy-saving wayfor biofuel production.

Correction: Nutritional targeting modification of silkworm pupae oil catalyzed by a smart hydrogel immobilized lipase.

Correction for 'Nutritional targeting modification of silkworm pupae oil catalyzed by a smart hydrogel immobilized lipase' by Jin-Zheng Wang et al., Food Funct., 2021, 12, 6240-6253, DOI: 10.1039/D1FO00913C.

Improvement of XYL10C_∆N catalytic performance through loop engineering for lignocellulosic biomass utilization in feed and fuel industries.

BACKGROUND: Xylanase, an important accessory enzyme that acts in synergy with cellulase, is widely used to degrade lignocellulosic biomass. Thermostable enzymes with good catalytic activity at lower temperatures have great potential for future applications in the feed and fuel industries, which have distinct demands; however, the potential of the enzymes is yet to be researched. RESULTS: In this study, a structure-based semi-rational design strategy was applied to enhance the low-temperature catalytic performance of Bispora sp. MEY-1 XYL10C_∆N wild-type (WT). Screening and comparisons were performed for the WT and mutant strains. Compared to the WT, the mutant M53S/F54L/N207G exhibited higher specific activity (2.9-fold; 2090 vs. 710 U/mg) and catalytic efficiency (2.8-fold; 1530 vs. 550 mL/s mg) at 40 °C, and also showed higher thermostability (the melting temperature and temperature of 50% activity loss after 30 min treatment increased by 7.7 °C and 3.5 °C, respectively). Compared with the cellulase-only treatment, combined treatment with M53S/F54L/N207G and cellulase increased the reducing sugar contents from corn stalk, wheat bran, and corn cob by 1.6-, 1.2-, and 1.4-folds, with 1.9, 1.2, and 1.6 as the highest degrees of synergy, respectively. CONCLUSIONS: This study provides useful insights into the underlying mechanism and methods of xylanase modification for industrial utilization. We identified loop2 as a key functional area affecting the low-temperature catalytic efficiency of GH10 xylanase. The thermostable mutant M53S/F54L/N207G was selected for the highest low-temperature catalytic efficiency and reducing sugar yield in synergy with cellulase in the degradation of different types of lignocellulosic biomass.